BLUMAX Oplader til SONY NP-FW50 Batterier
Passer bl.a. til følgende batterier:
SONY:
NP-FW50 med flere
Er din oplader gået i stykker, blevet væk, eller bruger du kameraet som oplader, kan du her købe dig en Lithium-Ion batterioplader i god kvalitet.
Lagerstatus: Varen er på lager og vil blive afsendt indenfor 24 timer.
Beskrivelse:
BATTERI OPLADER MED 2 ADAPTERE TIL HENHOLDSVIS LYSNET (110-240 volt) og BIL (12-24 volt):
Power Input: DC 12-24V
Power Output: DC 8.4V
Charging currency: 600mA (MAX)
AC power supply:
Power Input: AC 100-240V
Power Output: DC 12.0V, 1A, 12W
Car charger adaptor:
Power Input: DC 12-24V
Power Output: DC 4.2-12V
Dimensions: 106.5 x 69 x 37mm
Instruktioner:
• Plug the AC power adapter in a wall outlet.
• Connect the AC power adapter supplied with your char-ger to the DC
in-jack.
• “STATUS“ LED indicator shows RED when the charger is ready and
“CHARGE“ LED indicator shows fl ashing GREEN when waiting for battery
pack.
• Slide battery pack into the Charger and “CHARGE“ LED indicator turns
RED when charging.
• “CHARGE“ indicator fl ashes RED and GREEN alternatively when battery
pack has been charged to over 90%.
• When the battery pack is fully charged, the “CHARGE“ LED indicator
turns steady green.
• After the battery pack fully charged slide the battery pack out.
• Unplug power, “CHARGE“ and “STATUS“ indicator go out.
Vedligeholdelse og opbevaring:
• Charge at room temperature
• Store in cool and dry place
• Clean up the terminals with a soft cloth if soiled
• Unplug AC power adapter when not in use
Caution & Warning:
Do not expose the product to fire, water or moisture
Do not use AC power adapter other than speci fied by manufacturer.
Notes:
While charging the battery pack, “STATUS“ and “CHARGE“ LED indicators
will not light if the AC power adapter is not connected properly |
Sitemap
